Finding Ways To Keep Up With Refills

Steps on How to Refill Ink in a Toner

With the advancement in the technology word, printing has gone a step higher. This is mainly because of the introduction of laser printer toner. You should always refill your toner when your printing starts to fail. Some people always tend to think that their cartridge is worn out but it is their toner that is out. The cartridge is always made in such a way that it will take some years before it wears out. Knowing the right time to add your toner is the secret to making your toner last longer. This will help to extend its life. The reason for this is because each and cartridge is made to work with a specific weight, gain size and chemical type toner. These are the specifics that will only work with that cartridge and not work with any other than the provided one. After knowing the right time when to add the toner, the other thing you have to know is how to do it. That is why you need a step guide on how to refill your ink toner. They are as follows.

With your toner at hand, you will first of all need to locate or make the fill hole. The cartridge usually have a holding tank for the toner powder. Some cartridges do have refill holes while others do not. After purchasing the refill kit you will get an instruction guide on how to do it. If there is no hole on your cartridge, then you will have to create one. You should not do this anywhere because you might end up destroying it. Often at times the hole is supposed to be created in either ends and not in the middle, mostly the side that faces up.

The toner comes with the specific cartridge that it can work with. This is where you will need the second step. You now need to pour the toner. Make sure that it is the correct one and also read the instructions too before pouring it. Check on some details like the expiry date just to confirm that you are pouring a good toner. For you not to spill the toner, use the funnel that you are to fit in the toner cup.
Refills: 10 Mistakes that Most People Make

The last and third step is to release the fill hole. If your cartridge has a hole they you have to return the cup that cover the hole. Cartridge refill kits where you have burn a fill hole comes with a specific aluminum plate for that particular job. The use of that tape is to cover the hole. You will then gently shake the cartridge to evenly distribute the toner. You will now reinsert tit to the printer and start printing once gain.Smart Ideas: Options Revisited